跳至主要内容

Second Hand Induction Melting Furnace

Second Hand Induction Melting Furnace

Second Hand Induction Melting Furnace


1. Brief Introduction of Second Hand Induction Melting Furnace

The second hand medium-frequency induction melting furnace uses IGBT as a magnetic core inverter. The alternating current in the coil melts the metal in the crucible, then heats the hot metal to the temperature it needs to be heat treated before forging, sintering, and hot rolling in the foundry and smelting industry.

2. Application of Second Hand Induction Melting Furnace

LSZ series induction melting furnaces can melt the following materials:

(1) Iron, pig iron, cast iron;

(2) Steel, stainless steel, cast steel, carbon steel, and bearing steel;

(3) Precious metals such as gold, and silver;

(4) copper, brass, bronze;

(5) aluminum, aluminum alloy;

(6) Zinc, lead, tin, magnesium, nickel, titanium.


Features of Second Hand Induction Melting Furnaces


(1) High efficiency: induction power, heat transfer to the furnace in a short time.

(2) Energy saving: Compared with traditional melting methods (gas and oil), it saves 20%~30% power.

(3) Easy and safe to use: comprehensive indicator light controller, safer and easier for workers to operate.

(4) Stable use: Our products have been tested at various levels, reducing the failure rate to a great extent.

(5) Environmental protection: electricity, no air pollution, no dust, and low noise.

(6) Easy to carry and install: Portable and save more space.


Professional sales staff will recommend our melting furnace types to you according to your job. Melting takes 20-30 minutes when the stove is hot at its maximum melting capacity.



The Main Technical Parameters of the Second Hand Induction Melting Furnace

ModelModelLSZ-110
Rated Power110/kW
Intel Coil Cable90mm2
Control switch3 * 225A
Cooling water pressure≥ 0.2MPA
Cooling water flow≥ 20 l/min
Melting ability150kg copper gold and silver; 50kg iron steel stainless steel, aluminum, aluminum alloy
Operating Voltage3 phase 380 V, 50/60 HZ
Oscillation frequency1-15 KHZ
The output voltageApprox. 70-550 V
Output current160A
Weight89 kg，40 kg
Dimensions880*500*870mm，550*400 * 500mm


As for Packaging:

1. Pack induction melting furnace with waterproof film;

2. Put it in standard export plywood or wooden box;

3. Put foam around it to prevent shock;

4. Secure the box with nails.


As for Shipping:

1. If you have a shipper in China, we can send an induction melting furnace to him/her for free.

2. If you want us to send you the induction melting furnace directly, we can send it to any major port in China in time.


Pre-sale Service:

1. Reply to your inquiry immediately.

2. Experienced sales answer all questions in fluent English.

3. Customized design is available.

4. The details of our products, our company if required.


After-sales Service:

1. Provide technical support or other accessories when necessary.

2. Free boot installation, debugging, and test run.

3. One-year warranty. Once there is trouble within one year, professional engineers and sales will be appointed to help immediately.



To make a long story short, this is an introduction to the Second Hand Induction Melting Furnace. I hope this article can help you have a basic understanding of this process. If you want to start a business in this field, we suggest you consult experts.

Are you looking for a reliable Intermediate Frequency Induction Furnace? If so, you can go to Hani Metallurgy. They also provide induction furnaces products.


Hani Metallurgy is the one-stop supplier able to design, manufacture, install and commission your melt shop and hot rolling mill plant from A to Z.


Free send inquiries to stella@hanrm.com  or inquiry99@hanmetallurgy.com if any needs.

Email: stella@hanrm.com Or stellarollingmill@gmail.com                              inquiry99@hanmetallurgy.com

Whatsapp/Wechat:+8615877652925

Website:  https://www.hanmetallurgy.com/

                https://www.hanrm.com

标签：
地点: H2CM+9VW, Dhamial Rd, Rawalpindi, Punjab, 巴基斯坦

评论

发表评论

此博客中的热门博文

Application Range of Medium Frequency Induction Furnace

  Application Range of Medium Frequency Induction Furnace (1) Intermediate frequency induction furnace is used for forging and rolling 1. Wheel forgings, ring forgings, shaft forgings, cylinder forgings, gear forgings, stainless steel forgings, and large flanges. 2. Hot heading of standard parts and fasteners, such as heating for tempering, forging, and extrusion of high tools. 4. Quenching and tempering of bar materials (2) Intermediate frequency induction furnaces are used for smelting 　 Including the smelting of steel, gold, silver, copper, and aluminum, especially in the foundry industry (3) Intermediate frequency induction furnace is used for heat treatment 1. Heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc. 2. High-frequency hardened crank pins, sprockets, camshafts, valves, various rocker arms, rocker shafts for various auto parts and motorcycle parts; various gears, spline shafts, transmission axles, High-frequ
发表评论
阅读全文

Troubleshooting of Medium Frequency Furnace

Troubleshooting of Medium Frequency Furnace This article introduces the faults and solutions of medium frequency furnace. 1. Fault phenomenon: large DC current, low DC voltage, and if the voltage, dull equipment sound, over-current protection. Analysis and treatment: the thyristor with one arm of the inverter bridge may be short-circuited or open-circuited, resulting in the operation of the three-arm inverter bridge. Use an oscilloscope to observe the voltage drop waveform of the thyristor on the four bridge arms of the inverter bridge. If the voltage drop waveform of the thyristor on one bridge arm is a line, the thyristor has been through; if it is a sine wave, the thyristor has not been through. Replace the through thyristor; find out the reason why the thyristor is not turned on. 2. Fault phenomenon: when the heavy load cold furnace is started, all electrical parameters and sounds are normal, but the power cannot be raised, and overcurrent protection. Analysis and
发表评论
阅读全文

Advantages and Disadvantages of Electric Arc Furnace and Induction Furnace Steelmaking

Electric Arc Furnace VS Induction Furnace Steelmaking Comparison of advantages and disadvantages of electric arc furnace and induction  furnace steelmaking 1. The induction furnace heats up quickly and has high thermal efficiency. The heat is generated inside the charge (steel liquid), so the heating is fast. In the arc furnace, the heat of the arc after the material is cleared must be transferred to the molten steel through the slag, which is indirect heating. Thermal efficiency is poor. The furnace is in the shape of a basin, and a large part of the heat of the arc is lost through the furnace cover and the furnace wall. 2. The oxidative burning loss of elements in induction furnace steelmaking is less. Because there is no ultra-high temperature action of the arc in the induction furnace steelmaking, the burning rate of the elements in the steel is low. 3. In the induction furnace steelmaking, the composition and temperature of the molten steel are relatively uniform.
发表评论
阅读全文