跳至主要内容

Medium Frequency Smelting Furnace Melting Process Requirements

Medium Frequency Smelting Furnace

Medium Frequency Smelting Furnace Melting Process Requirements 

According to the characteristics of the crucible materials used, the melting process of the medium-frequency induction furnace can be divided into two types: the partial alkali crucible smelting method and the acid crucible smelting method. Meta-alkali crucible smelting method can be divided into the melting method and the oxidation method. The acid crucible smelting method is only limited to the melting method. 

Due to the low refractoriness of the crucible material, the oxidation process can not be carried out. The alkaline crucible smelting method is the most commonly used smelting method. It can be used for smelting high alloy steel, stainless steel plate, wear-resistant steel, tool and mold steel, electric heating aluminum alloy, precision alloy, corrosion-resistant aluminum alloy, high-temperature alloy, and other types. The application scope of the acid crucible smelting method is small, and it is only limited to smelting medium carbon steel, chromium manganese nitrogen wear-resistant steel, high-speed tool steel, high carbon steel mold steel, wear-resistant steel, etc. Smelting steel must have high silicon content, without partial alkali crucibles such as Al, Ti, B, Zr, and other oxidizable elements. The smelting method is the way to conduct smelting in crucibles built with basic refractory insulation materials or tied. 

According to the difference of applied raw materials, it is further divided into three smelting methods: the new upgraded material melting method, the partial return material melting method, and the oxidation method.

(1) The new upgraded material melting method applies the new material configuration to smelting all the returned waste. This type of smelting method is applicable to the production and manufacture of key commodities with high-quality standards. Because all new materials are used and cannot be matched with returned materials, the cost of raw materials is high and the corresponding cost is high.

(2) A part of the seasoning for smelting with the return material melting method consists of the new material and the return material. Among them, the structural characteristics and blending amount of the returned materials have certain harm to the smelting quality of the products. The total number of returned materials shall be effectively allocated according to the use of the equipment. The aluminum alloy raw material can be recycled by using the returned material, which can save energy and control costs.

(3) The raw materials of the oxidation smelting process are mainly carbon waste steel and alloy structural steel waste steel. Smelting shall be carried out according to blowing oxygen to help melt during the melting period and blowing oxygen to reduce carbon and restore deammonia after cleaning. The feature of this method is that carbon waste steel and alloy structural steel waste steel can be recycled. Suitable for smelting carbon steel castings, high alloy steel, etc. In addition, the use of oxidation can complete the dephosphorization and carburization of molten steel and reduce the phosphorus and carbon components in steel.


Hani Metallurgy is the one-stop supplier able to design, manufacture, install, and commission your melt shop and hot rolling mill plant from A to Z.


Free send inquiries to stella@hanrm.com  or inquiry99@hanmetallurgy.com if any needs.

Email: stella@hanrm.com Or stellarollingmill@gmail.com                              inquiry99@hanmetallurgy.com

Whatsapp/Wechat:+8615877652925

标签：
地点: Isfahan Province, Esfahan, شهرز، JMJR+P57伊朗

评论

发表评论

此博客中的热门博文

Application Range of Medium Frequency Induction Furnace

  Application Range of Medium Frequency Induction Furnace (1) Intermediate frequency induction furnace is used for forging and rolling 1. Wheel forgings, ring forgings, shaft forgings, cylinder forgings, gear forgings, stainless steel forgings, and large flanges. 2. Hot heading of standard parts and fasteners, such as heating for tempering, forging, and extrusion of high tools. 4. Quenching and tempering of bar materials (2) Intermediate frequency induction furnaces are used for smelting 　 Including the smelting of steel, gold, silver, copper, and aluminum, especially in the foundry industry (3) Intermediate frequency induction furnace is used for heat treatment 1. Heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc. 2. High-frequency hardened crank pins, sprockets, camshafts, valves, various rocker arms, rocker shafts for various auto parts and motorcycle parts; various gears, spline shafts, transmission axles, High-frequ
发表评论
阅读全文

Troubleshooting of Medium Frequency Furnace

Troubleshooting of Medium Frequency Furnace This article introduces the faults and solutions of medium frequency furnace. 1. Fault phenomenon: large DC current, low DC voltage, and if the voltage, dull equipment sound, over-current protection. Analysis and treatment: the thyristor with one arm of the inverter bridge may be short-circuited or open-circuited, resulting in the operation of the three-arm inverter bridge. Use an oscilloscope to observe the voltage drop waveform of the thyristor on the four bridge arms of the inverter bridge. If the voltage drop waveform of the thyristor on one bridge arm is a line, the thyristor has been through; if it is a sine wave, the thyristor has not been through. Replace the through thyristor; find out the reason why the thyristor is not turned on. 2. Fault phenomenon: when the heavy load cold furnace is started, all electrical parameters and sounds are normal, but the power cannot be raised, and overcurrent protection. Analysis and
发表评论
阅读全文

Advantages and Disadvantages of Electric Arc Furnace and Induction Furnace Steelmaking

Electric Arc Furnace VS Induction Furnace Steelmaking Comparison of advantages and disadvantages of electric arc furnace and induction  furnace steelmaking 1. The induction furnace heats up quickly and has high thermal efficiency. The heat is generated inside the charge (steel liquid), so the heating is fast. In the arc furnace, the heat of the arc after the material is cleared must be transferred to the molten steel through the slag, which is indirect heating. Thermal efficiency is poor. The furnace is in the shape of a basin, and a large part of the heat of the arc is lost through the furnace cover and the furnace wall. 2. The oxidative burning loss of elements in induction furnace steelmaking is less. Because there is no ultra-high temperature action of the arc in the induction furnace steelmaking, the burning rate of the elements in the steel is low. 3. In the induction furnace steelmaking, the composition and temperature of the molten steel are relatively uniform.
发表评论
阅读全文