10-500Kg Vacuum Induction Furnace Specifications

The melting of metals by electromagnetic induction heating in a vacuum state is called vacuum induction melting. The main structure of the vacuum induction furnace includes a furnace body, a crucible, an induction coil, a vacuum system, a melting power supply, and a control system. The melting power supply is an intermediate frequency AC power supply, and the frequency selection depends on the metal properties and melting volume.

10-500Kg vacuum induction melting can realize refining, and impurities are removed, decomposed, floated, and volatilized through chemical reactions in the melting process. When the metal is melted to the desired pure state, it is usually poured into the mold through a preheated funnel.

Vacuum induction melting is generally used to produce superalloys, stainless steels, composite magnet alloys, and other important advanced alloys.

1. 10-500Kg Vacuum Induction Melting Furnace Application:

It is used for smelting and purification of stainless steel, superalloy, and magnetic materials, and produces alloy bars for precision casting and remelting electrodes.

2. Features of 10-500Kg vacuum induction melting furnace:

2.1. The double-layer stainless steel water-cooled furnace wall prolongs the service life of the equipment.

2.2. Efficient induction heating intermediate frequency power supply.

2.3. Multi-chamber structure: casting room, molding room, feeding room.

2.4. The multi-group feeding system directly feeds materials in a vacuum state to meet rapid melting.

2.5. Low resistivity wet filter is used to protect the vacuum pump and reduce the risk of fire.

2.6. Computer and PLC automatic control system.

2.7. Adding alloy, sampling, temperature measurement, and pouring in vacuum state.

3. Technical indicators of 10-500Kg vacuum induction melting furnace:

3.1. Ultimate vacuum: 6.6×10-3Pa

3.2. Pressure rise rate: 1.0Pa/h

3.3, IF power: 50-2000KW

3.4. Maximum temperature: 2300℃

3.5. Loading capacity: 10-500Kg

4. Specifications and models of vacuum induction melting furnace:

VIM-1KG//VIM-5KG//VIM-50KG//

VIM-150KG//VIM-300KG//VIM-500KG

Hani Metallurgy is the one-stop supplier able to design, manufacture, install, and commission your melt shop and hot rolling mill plant from A to Z.

Free send inquiries to stella@hanrm.com or inquiry99@hanmetallurgy.com if any needs.

Email: stella@hanrm.com Or stellarollingmill@gmail.com inquiry99@hanmetallurgy.com

Whatsapp/Wechat:+8615877652925

Website: https://www.hanmetallurgy.com

此博客中的热门博文

Application Range of Medium Frequency Induction Furnace

Application Range of Medium Frequency Induction Furnace (1) Intermediate frequency induction furnace is used for forging and rolling 1. Wheel forgings, ring forgings, shaft forgings, cylinder forgings, gear forgings, stainless steel forgings, and large flanges. 2. Hot heading of standard parts and fasteners, such as heating for tempering, forging, and extrusion of high tools. 4. Quenching and tempering of bar materials (2) Intermediate frequency induction furnaces are used for smelting 　 Including the smelting of steel, gold, silver, copper, and aluminum, especially in the foundry industry (3) Intermediate frequency induction furnace is used for heat treatment 1. Heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc. 2. High-frequency hardened crank pins, sprockets, camshafts, valves, various rocker arms, rocker shafts for various auto parts and motorcycle parts; various gears, spline shafts, transmission axles, High-frequ

阅读全文

Troubleshooting of Medium Frequency Furnace

Troubleshooting of Medium Frequency Furnace This article introduces the faults and solutions of medium frequency furnace. 1. Fault phenomenon: large DC current, low DC voltage, and if the voltage, dull equipment sound, over-current protection. Analysis and treatment: the thyristor with one arm of the inverter bridge may be short-circuited or open-circuited, resulting in the operation of the three-arm inverter bridge. Use an oscilloscope to observe the voltage drop waveform of the thyristor on the four bridge arms of the inverter bridge. If the voltage drop waveform of the thyristor on one bridge arm is a line, the thyristor has been through; if it is a sine wave, the thyristor has not been through. Replace the through thyristor; find out the reason why the thyristor is not turned on. 2. Fault phenomenon: when the heavy load cold furnace is started, all electrical parameters and sounds are normal, but the power cannot be raised, and overcurrent protection. Analysis and

阅读全文

Advantages and Disadvantages of Electric Arc Furnace and Induction Furnace Steelmaking

Electric Arc Furnace VS Induction Furnace Steelmaking Comparison of advantages and disadvantages of electric arc furnace and induction furnace steelmaking 1. The induction furnace heats up quickly and has high thermal efficiency. The heat is generated inside the charge (steel liquid), so the heating is fast. In the arc furnace, the heat of the arc after the material is cleared must be transferred to the molten steel through the slag, which is indirect heating. Thermal efficiency is poor. The furnace is in the shape of a basin, and a large part of the heat of the arc is lost through the furnace cover and the furnace wall. 2. The oxidative burning loss of elements in induction furnace steelmaking is less. Because there is no ultra-high temperature action of the arc in the induction furnace steelmaking, the burning rate of the elements in the steel is low. 3. In the induction furnace steelmaking, the composition and temperature of the molten steel are relatively uniform.

阅读全文

Induction Furnaces

搜索此博客